The device_type value "wireless_access_point" is used in the "WAPs - pre" script for the "Network Switch" pattern, but this is missing from the choice list - Known Error

The device_type value "wireless_access_point" is used in the "WAPs - pre" script for the "Network Switch" pattern, but this is missing from the choice list Description The device_type value "wireless_access_point" is used in the "WAPs - pre" script for the "Network Switch" pattern, but this is missing from the cmdb_ci_netgear level choice list, which is used for these cmdb_ci_wap_network class switches. This makes it an invalid value that is displayed in blue on lists, and not at all on forms, instead showing "-- None --"

Steps to Reproduce

This is reproducible on Tokyo patch 1, with Pattern v1.0.94, and class models v1.40.0.

Discover a Cisco wireless access controller, such as the Cisco AIR-CAP2702I-E-K9, which will be discovered by the Network Switch pattern List the cmdb_ci_wap_network table, and open the new cmdb_ci_wap_network CI in a form. Actual behaviour: In lists, the device type value "wireless_access_point" is shown in blue. On the form, because there is no label defined for this value, it defaults to the first choice "-- None --"

Expected behaviour: There should be a sys_choice record for value "wireless_access_point" in table=cmdb_ci_netgear and element=device_type, so that a proper label exists for this value e.g. "Wireless Access Point"

Workaround This problem is currently under review and targeted to be fixed in a future release. Subscribe to this Known Error article to receive notifications when more information will be available.