How to do snmpv3 get request (or snmp ping) from command line for the linux mid server with noauth, noencrpt (for SNMPV3) credential.Issue How to do snmpv3 get request (or snmp ping) from command line for the linux mid server with noauth, noencrpt (for SNMPV3) credential.ResolutionThe commands in Shazzam to verify the credentials are hardcoded in Javascript and not visible. The alternate way to test the credentials from the Linux server is to either use snmpget or snmpwalk commands and examples given below http://snmplabs.com/snmpclitools/snmpget.html Examples : General SNMPv3 command to test the credentials (authentication and encryption): " snmpwalk -v 3 -a md5 -A PASSWORD -x des -X PASSWORD -u MYUSERNAME IP.ADD.RE.SS " snmpget query via SNMPv3 (authentication and encryption): " snmpget -v3 -l authPriv -u [user name] -a MD5 -A [user password] -x DES -X [DES password] [IP address of host] [OID for update check]" snmpget query via SNMPv3 (authentication, but no encryption): snmpget -v3 -l authNoPriv -u [user name] -a MD5 -A [MD5 hash of user password] [IP address of host] [OID for update check] snmpget query via SNMPv3 (no authentication, no encryption):: snmpget -v3 -l noAuthNoPriv -u [User name] [IP address of the host] [OID for update check]